Equipment Specification


feniks

  • Dynamic range of the measured electric signal – at least 100 dB
  • Maximum measured voltage of a signal measure the  of transient processes – at least 4 B.
  • The time range needed to transient process – from 100 ns up to 30 mc.
  • Root-mean-square value of internal channel noise under the condition of a shorted         input, and this value is not higher than 0.5 mcV and is determined  at N = 64 (accumulate number) and initial measurement time  equal to 1 mcs.
  • automatic registration mode
  • weight – 6 kg without batteries
  • air temperature - 50°C - + 40°C
  • relative air humidity < 90 % (at 20°C)
  • pressure 450-800 mm Hg
  • continuous work time - 8 hours (at extreme temperature conditions ~3 hours)